Spring Sale ends in
Hot Tub Cover Measuring Guide
When it comes to purchasing a replacement hot tub cover, taking proper measurements is the key to receiving the perfect product. Read through these step by step directions to ensure that you are taking accurate measurements for your new spa cover. If you have any questions whatsoever about how to measure a spa cover feel free to contact our team for help. We are on stand by and happy to assist you in ordering the right product for your hot tub or spa.
I. Deciding What To Measure:If any of the following apply to you, measure your existing cover:
- Cover must be in decent condition. Natural wear and tear is fine.
- Cover has not warped, become water logged, or changed shape since its purchase.
- You are happy with the way the current cover fits.
- You have no existing cover.
- Your current cover is warped, has become water logged, or changed shape since its purchase.
- Unhappy with the way your current cover fits.
II. How to Measure:
Round up measurements to nearest half inch or inch. A cover that is 1-2 inches too large will but a cover that is too small will decrease the of the insulation. If your measurements are close to being perfectly square (ie: 78.5” x 78”), it probably is a perfect square.
III. Where to Measure:
Choose which installation type looks most like yours:
IV. Choose a Shape and Measure:
V. Choosing a Fold/ Hinge:
An “A Fold” cuts the A dimension in half, a “B Fold” cuts the B dimension in half. If you have a cover that is perfectly square, a fold/hinge does not needConsiderations:
- Where is the control panel located? It’s most common for covers to fold away from the control panel.
- The longer dimension is usually the one that get folded in half, but this is not always the case.
- Ask yourself: Is there anything obstructing the path of the cover opening and closing that would change the hinge? (ie: fence)
VI. The Corner Radius:
If you don’t have a square handy:
VII. Measuring the Skirt and Strap:
A 5” standard skirt length will be used if no custom length is requested.
The cover skirt is the that hangs around the edge from the bottom of your cover. Measure the skirt of your spa from the bottom of the cover down. For no skirt, enter zero; the minimum length for a skirt is 1.5”.
A 7” standard strap length will be used if no custom length is requested.
To get an accurate measurement of the safety strap, you need to measure it from the bottom of the cover down and include the skirt length but not the clip. The strap needs to hang at least 1.5” below the skirt. It is also good to note that due to production variations it cannot be guaranteed you will receive a matching strap placement. Straps are required on every cover.
Have you completed your measurements? If so, you’re ready to purchase your custom spa cover. Browse our customization options and place your order today. Shop now!
It is easy for a website to claim they have the best quality but at MySpaCover we guarantee it. We utilize only the highest quality materials and the most sophisticated processes to offer the best covers available online. Here is how our covers compare to the competition:
Our heavy-duty handles come standard and are double stitched using marine grade vinyl to ensure the highest durability and most attractive aesthetics.
Our standard straps are double stitched and are also produced with marine-grade vinyl.
We double stitch every seam and hinge to ensure your spa cover can be used for years to come.
Their cheap handles are more prone to wear and tear and are known to rip off within the first two years plus the appearance speaks for itself.
Our competition uses low-quality straps that are prone to breakage and often times do not match the color of the spa cover.
Their use of single stitching and exposed shells can ultimately cause cracking and heat loss, costing you more on your electric bill.
The underside of a spa cover is often overlooked. However, this is the material that is in constant contact with high temperatures and the chemicals in your spa. The life of your spa cover depends on a high-quality spa underside. We don’t cut corners like the other guys so you can trust that our 6 mil plastic wrap is vapor sealed to the core and will keep the heat out.
MySpaCover utilizes an 11oz PVC coated poly that, after years of rigorous testing, has proven to be the best possible material to withstand constant high temperates and chemical exposure.
Beware of mesh bottoms used by competitors as this type of material is meant to cut costs and is prone to failure.