Aluminum Lift Plates
10"x 2" tall
This option is necessary when the cover lifter requires attachment into the hot tub cover. This will work with the Hot Spring CoverCradle, CoverCradle II, Lift-N-Glide and Uprite cover lifters. This requires piercing of the vinyl skin of the cover into metal plates on the inside of the cover. With this option, we will add aluminum or metal plates inside the cover. These will not be visible to the naked eye but can be located by tapping on the outside of the cover. Not all Hot Spring/Hot Spot Cover Lifters require this option. Some newer models are the “fold over” type and require no additional mounting hardware.
DISCLAIMER: MYSPACOVER™ is not responsible for errors in measurements. Please make sure to double check your dimensions before proceeding. Please remember that all covers are custom made to your specifications and take 4-7 weeks in production before shipping. Weight load is measured as a distributed load across the cover.
How to Measure your Spa
It is easy for a website to claim they have the best quality but at MySpaCover we guarantee it. We utilize only the highest quality materials and the most sophisticated processes to offer the best covers available online. Here is how our covers compare to the competition:
Our heavy-duty handles come standard and are double stitched using marine grade vinyl to ensure the highest durability and most attractive aesthetics.
Our standard straps are double stitched and are also produced with marine-grade vinyl.
We double stitch every seam and hinge to ensure your spa cover can be used for years to come.
Their cheap handles are more prone to wear and tear and are known to rip off within the first two years plus the appearance speaks for itself.
Our competition uses low-quality straps that are prone to breakage and often times do not match the color of the spa cover.
Their use of single stitching and exposed shells can ultimately cause cracking and heat loss, costing you more on your electric bill.
The underside of a spa cover is often overlooked. However, this is the material that is in constant contact with high temperatures and the chemicals in your spa. The life of your spa cover depends on a high-quality spa underside. We don’t cut corners like the other guys so you can trust that our 6 mil plastic wrap is vapor sealed to the core and will keep the heat out.
MySpaCover utilizes an 11oz PVC coated poly that, after years of rigorous testing, has proven to be the best possible material to withstand constant high temperates and chemical exposure.
Beware of mesh bottoms used by competitors as this type of material is meant to cut costs and is prone to failure.